Rocky Mountain Lifting Club... Denver Gyms and Fitness Centers

Fury
Until mid 2002 all bench shirts were based upon the forward sleeve design developed and patented by designer Gabriele Knecht. Titan set out to change that. Introduced in July 2002, the Fury bench shirt revolutionized the industry. It featured a radically different design that initially drew chuckles and even criticism from hard core fans of the existing shirt design – until the records started falling! The innovation was the 90 degree hemispherical sleeves. The Fury's 90 degree hemispherical sleeves store energy as soon as the elbows are cracked and the bar descent begins. More energy storage (resistance) means more explosive power and bigger benches. This innovation allows a lifter to adjust the shirt to dial in more or less power. Pull the shirt up and it would reduce energy storage. Pull it down and create more energy storage. Twist or torque the sleeves in and more energy could be stored. The most copied shirt design in powerlifting history, the Fury features our NXG Plus fabric and a dynamic stretch back. The Fury for flat benchers.

SRP: $115

	2-Ply Super Fury INTRODUCING THE SUPER FURY—NOW WITH LOWERED AND REINFORCED NECKLINE! SRP: $190 Size:

F6
The IPF approved patent pending F6 is specifically designed for arched benchers, to improve control and increase the potential for bigger benches! Like the Fury, the F6 sleeves are set at a 90 degree angle as you look down the length of the shirt. However, the big difference is in the angle of the sleeves as you look across the shirt. The sleeves on the F6 are set at a forward, tilted angle. As the lifter lies down on the bench and begins arching into position, the sleeves on the F6 tilt back to the optimum 90° angle in both planes - and only after the arched position is assumed. This means a lower groove, maximum stroke efficiency, more control and increased power! Features our NXG Plus fabric and a dynamic stretch back.

SRP: $115

2-Ply Super Fury
INTRODUCING THE SUPER FURY—NOW WITH LOWERED AND REINFORCED NECKLINE!

SRP: $190

Size:

	2-Ply Super F6 INTRODUCING THE SUPER F6—NOW WITH LOWERED AND REINFORCED NECKLINE! SRP: $190 Size:

	Katana A/S The Katana A/S for arched benchers features our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply type power from a single-ply IPF approved shirt. The Katana will take your benches to new heights! SRP: $165 Size:

	Super Katana A/S The Super Katana features our new improved and IPF approved super neck. It's wider, heavier, and cut lower for greatly improved performance. The new lower cut neck reduces likelihood of the shirt riding up and putting pressure on the neck while the increased width and thickness of the collar acts as an energy band to create more resistance and store more energy than regular Katana's. These two simple changes produce a huge improvement in performance. The Katana comes in both arched (A/S) and flat (S/S) bench styles. SRP: $195 Size:

	2-Ply Super Katana A/S Designed for arched benchers the Super Katana A/S 2-Ply features our improved IPF approved collar design, though it's 2- Ply power makes it for unlimited competition only. It's wider, heavier, and cut lower for greatly improved performance. The new lower cut neck reduces likelihood of the shirt riding up and putting pressure on the neck while the increased width and thickness of the collar acts as an energy band to create more resistance and store more energy than regular Katana's. These two simple changes produce a huge improvement in performance. Rounding out the Super Katana is our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply super power for an unlimited world. SRP: $265 Size:

	3-Ply Super Katana A/S SRP: $350 Size:

	Katana S/S The Katana S/S for flat benchers features our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply type power from a single-ply IPF approved shirt. SRP: $165 Size:

	Super Katana S/S Designed for flat benchers the Super Katana S/S Custom 2-Ply features our improved IPF approved collar design, though it's 2- Ply power makes it for unlimited competition only. It's wider, heavier, and cut lower for greatly improved performance. The new lower cut neck reduces likelihood of the shirt riding up and putting pressure on the neck while the increased width and thickness of the collar acts as an energy band to create more resistance and store more energy than regular Katana's. These two simple changes produce a huge improvement in performance. rounding out the Super Katana is our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply super power for an unlimited world. SRP: $195 Size:

	2-Ply Super Katana S/S Designed for flat benchers the Super Katana S/S Custom 2-Ply features our improved IPF approved collar design, though it's 2- Ply power makes it for unlimited competition only. It's wider, heavier, and cut lower for greatly improved performance. The new lower cut neck reduces likelihood of the shirt riding up and putting pressure on the neck while the increased width and thickness of the collar acts as an energy band to create more resistance and store more energy than regular Katana's. These two simple changes produce a huge improvement in performance. rounding out the Super Katana is our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply super power for an unlimited world. SRP: $265 Size:

	3-Ply Super Katana S/S SRP: $350 Size:
PLEASE CALL FOR THE FOLLOWING CUSTOM ORDERS OR ADD ONS:
$150 $225 $150 $225 $165 $230 $300 $385 $200 $230 $300 $385 Add $30 Add $30 Add $15 Add $20 Add $45	Custom Fury Custom 2-Ply Super Fury Custom F6 Custom 2-Ply Super F6 Custom Katana A/S Custom Super Katana A/S Custom 2-Ply Super Katana A/S Custom 3-Ply Super Katana A/S Custom Katana S/S Custom Super Katana S/S Custom 2-Ply Super Katana S/S Custom 3-Ply Super Katana S/S Upgrade to NXG Super Plus Grid Stitch Custom Thread Color Spandex Back Open Back w/ Aplix Straps

1690 S. Abilene St.
Aurora, CO 80012

303.337.4613

rmlcco@yahoo.com

Custom Suits Require
the Following Info:

Height
Weight
Shoulders
Chest
Flexed Biceps
Fit: (Competition/
Meet/Regular)
Color(s) Choice
Date Needed

To order custom suits, please call the Rocky Mountain Lifting Club at (303) 337-4613. Thank you.

Custom Titan gear takes about 6—8 weeks to ship.

If you experience any difficulties with the Online Store, please notify us immediately.

TITAN GEAR

Squat Suits

Deadlift Suits

Bench Shirts

Wraps

Texas Belts

Toro Belts

Bench Aids

Briefs

Singlets & Slip Ons

Shoes & Socks

Miscellaneous

PLEASE EMAIL RMLC FOR SHIPPING RATES OUTSIDE OF THE U.S